Configuration instructions

Hardware structure

The transmission system

A phased orbit

Clamping device

Hold fixed workpieces up and down

Frame structure

Steel frame architecture

Control system

Industrial computers / motion control cards

How to drive it

Servo system / spindle drive

Servo System / Electric Cylinder Transmission

Servo system / spindle drive

Number of drive shafts

3 Axis

3 Axis

4 Axis

Detection device

UV detection

Cleaners

The cleaning of the rubber valve can be set at a time and a number of times to ensure the cleanliness of the valve body.

Waste liquid recovery device

Recovery of waste liquid produced during commissioning device, can ensure 24 hours continuous operation without waste liquid treatment

Z-axis configuration

Number of rubber valves

2

Needle valve coating width

2mm

The width of fine mist flower coating

6-8mm

Feeding System

Resin tank 1 capacity

10L＊1

Storage tank 2 capacity

2L＊1

How to stir

Manual stirring / pneumatic stirring

Technical parameters

Valid itinerary

Coating range

L7 0 ＊ W50 mm~ L 450 *W300 mm

L70 ＊ W50 mm~ L45 0 *W450 mm

L70 ＊ W50 mm~ L50 0 *W500 mm

Efficiency and precision

Positioning accuracy

± 0.02mm

Repetition accuracy

± 0.02mm

Maximum working speed

600mm/sec

Spray edge clarity

±0.5mm

Spray thickness

0.03 mm --1mm

The transmission system

Transmission transfer direction

L←→R

Transmitted transmission height

900mm±20mm

Panel height

±100mm

How to adjust the scale

manual

complete machine

Number of program storage

More than 10000

operating system

Windows 7 operating system

How to program

示教/CAD

Gas Source Requirements

0.5Mpa~0.8Mpa

Flow of the gas source

150CFM~200CFM

Power Supply

AC220V 50~60Hz 　1.5kw

AC220V 50~60Hz 　1.5kw

AC220V 50~60Hz 　1.8kw

Exterior dimensions

L 1000mm* W 1100mm* H 1650mm

L 1000mm* W 1100mm* H 1650mm

L 1000mm* W 1100mm* H 1650mm

weight

550KG

550KG

60 0KG

Z-axis structure

Equipped with a dual valve structure, it cannot be adjusted

1 spray valve, 1 glue valve

Standard

Equipped with a dual valve structure that can adjust the spacing

2 spray or dispensing valves with minimum spacing of 70 mm and maximum spacing of 200 mm

available

Configuration of a three-valve structure, non-adjustable

2 spray valves, 1 glue valve

available

Configuration of a three-valve structure with adjustable spacing

3 spray or dispensing valves with minimum spacing of 70 mm and maximum spacing of 130 mm

available

Equipped with a four-valve structure with adjustable spacing

4 spray or dispensing valves with minimum spacing of 70 mm and maximum spacing of 100 mm

available

Equipped with a four-valve structure with adjustable spacing

2 spray valves, 2 dispensing valves minimum spacing 150 mm, maximum spacing 200 mm

available

Glue supply system

Pressure bucket 1

1 5 L and 1 2 L pressure drum

Standard

Pressure bucket 2

1 x 10 L and 1 x 2 L pressure drum

available

Glue valves

Precision spray valves

Spray width 5-12 mm

Standard

Precision rubber valve

Minimum 2mm

Standard

Micro-vapour spray valve

Spray width minimum of 3 mm for precision coating processes

available

High viscosity spray valve

For high viscosity glue coating processes

available

Three modes of spray valve

For high viscosity or thick layer coating processes

available

Thin film coating valve

For non-atomized coating processes up to 100 cps

available

Other Projects

CCD vision system

Assist with programming and mark point positioning

available

barcode

Product traceability and identification of products

available

Description

Special features :

N Overall use of steel structure design , can withstand the impact of high-speed operation , stable operation of the machine without resonance noise .

N use manual teaching and CAD guide map programming mode , fault sound and light alarm and menu warning .

n ZThe axial direction can automatically rise and fall the adhesive valve according to the height of the non-standard device to adjust the single coating range .

N can realize straight line , circle , arc coating and point adhesion .

The n machine is equipped with a special cleaning device and an independent cleaning liquid container , which can automatically clean the glue valve .

N equipped with exhaust gas collection and discharge device 。Built-in filter, exhaust gas discharge can reach environmental standards；

N with SMEMA signal port , can communicate with other devices .

N High precision DC brushless motor equipped with stainless steel long chain , can smoothly add and subtract transmission , make products fast , stable and accurate transmission to the set position , and will not cause product injury .

N equipped with control buttons to achieve " emergency stop " " reset " " suspend " " start " and other functions

N It is equipped with an independent manual button to facilitate the debugging of the first piece and equipment cleaning .

 

Skype

Email

MSN

TradeManager

QQ